Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2005 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

'94 850 exhaust manifold install 850

I am replacing the exhaust manifild on my '94 850 non-turbo...I have the five gaskets which go between the manifold and head...which way are they mounted? Does the side with the black strip go on the head side or the manifold side?
thanks
mark








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    '94 850 exhaust manifold install 850

    I checked my VADIS and it appears that it can only go on there one way. If you're talking about the black line being under (not visible) or on top (visible) before you put the manifold back on, I would put it so the black line is visible. Also, don't forget the clamp on the 4th socket if you have a turbo engine and the crankcase ventilation hose coming up through the 2nd and 3rd ducts if yours had this to begin with (some weren't made with this). Also, while you're in there, clean the throttle body and replace its gasket...it's really a cheap part and a shame if you don't get it done while it's easily taken care of. Tighten the manifold from the middle out with torque at 20Nm or 14.75ftlbs. Good luck!
    --
    1998 S70 T5 Emarald Green Metallic, 2004 V70 2.5T Ruby Red, Previous Owner of Black '94 850 Turbo Wagon. My cars have been running so well lately they've got me worried.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.