Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Installing replacement engine, 2 unknown wires 700 1990

posted by  skafasis on  Wed Aug 17 02:35 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jan 22 10:01 CST 2014
[RELATED]

Both of those ring connectors appear to be ground connections. They should be bolted somewhere on the block. I think the AC one usually bolts to the aluminium mount bracket that is held in with the 4 large bolts but anywhere that has good ground on the block should be okay.


The distubitor should be removed and rotated and then bolted back down. It appears that you simply have installed the unit the wrong way.

The #1 contact would be the 3rd one up from the bottom in the orientation the unit is mounted at now.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Installing replacement engine, 2 unknown wires [700][1990]
posted by  squeaks  on Tue Aug 16 15:47 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.