Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Pulling steering wheel 120-130 1967

posted by  walrus3 on  Mon Jul 25 15:49 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

Did you file grooves in the nut for the bolts to pass through? I filed
mine through the corners of the nut so they are a bit deeper but are not
in any kind of a bid - good straight pull.
I'd suggest really good thread engagement and be sure there is at least
a couple threads' clearance between the nut and the wheel. Use high strength
bolts and you can tighten both of them pretty tight. Once they are good and
tight, a smart rap on the end of the column with a brass drift and a fairly
heavy hammer might surprise you.
--
George Downs Bartlesville, Heart of the USA!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Pulling steering wheel [120-130][1967]
posted by  Phil S.  on Mon Jul 25 08:53 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.