Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2018 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Changing to late wheel stud pattern 120-130 1966

posted by  carnut222 on  Fri Jun 11 15:06 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 31 00:44 CST 2012
[RELATED]

Hi All. I'm thinking about converting the rear axle in my 66 P220 to one from a later model (either 1800E/ES or 240, and yes, I know it's not a bolt-on operation - requires welding new brackets onto the axle tube - anyone who has done this I'd be interested to hear about it), which would result in having the later (5x108mm) wheel stud/hub pattern. What's the best way to change over the front? Is it possible to directly bolt the front hubs/knuckles/brakes from an 1800E/ES onto the front of my P220? I'm also planning to convert to the dual diagonal brake circuits. Swapping front hardware from an 1800E/ES would go a long ways towards helping in this respect. Are there other options for the front swap? Will 140 or 164 front hardware (knuckle/hub/brake) work at all, or is it totally different.

Thanks!

Greg Sievert






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Changing to late wheel stud pattern [120-130][1966]
posted by  carnut222  on Fri Jun 11 15:06 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.