Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

help with fault code, 89 GL 200

according to my factory manual published 3/93, 221 is a code for lean conditions at partial loads. before looking for anything real, make sure the hose from the mass meter is intact. then just pull the fuse by the battery and wait a bit. this will reset the adaptation in the ecu. if you get 221 again, then there is a problem. i will tell you, i have repalced a coupla ecus that threw codes for no apparent reason. that's why i always reset first and wait. if another code comes back, then reset again. if 221 comes back, then let's chase it. good luck, chuck.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New help with fault code, 89 GL [200]
posted by  rob2dog  on Sat Jan 24 03:21 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.