Thanks for the replies. Air intake and breather hoses are as tight as I can get them. I put in a new intake manifold gasket, new idle control hoses (both), new breather hoses. I bought the HD IPD breather hose which is from the flame trap to the accordian hose. The flame trap fits quite snug in that HD hose. The accordian hose looked good, so I didn't update that one. I didn't see any splits in the hose. The valve cover gasket is new. I don't smell gas from the FPR hose. The car runs quite well. I just don't hear or feel the rev up with starting. I will be more scientific and get out my tachometer to verify. I also need to check the TPS resistance measurements per Bentley. I'm waiting for my spare 951 to arrive. Of course I need to try it and make sure it works. I'll report back.