Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

REPLACING VOLTAGE COMBO REGULATOR & BRUSHES 200 1993

posted by  genedad on  Sun Jun 19 05:00 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Have 93 240 and need to replace the alternator's voltage regulator and brushes. I took off the exhaust heat shield, removed the old Combo pack (2 phillips head screws). PROBLEM - I could not put in new combo pack. The problem seems to be that the brushes have to be pushed down to get them and the regulator into the alternator. As any one know who reads this, you cannot see what you are doing. How do I get the new combo pack in??

I tried pulling the alternator so I could see what I'm doing, but the nut to the top bolt is rounded, and I cannot get a grip on it.

thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New REPLACING VOLTAGE COMBO REGULATOR & BRUSHES [200][1993]
posted by  genedad  on Sun Jun 19 05:00 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.