Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

I may have done a bad thing 900 1994

posted by  Raptop on  Thu Apr 21 20:57 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Apr 16 23:45 CST 2011
[RELATED]

I am in the midst of replacing my oil trap (aka breather box), and of course to do so requires the removal of the EGR valve. In the process of loosening the EGR inlet (from the exhaust side) I totally stripped the thread off the back of the EGR valve.

Will I need a new EGR valve? Or can that compression fitting come off and be replaced?

I started to put it back together in the hopes that there might be enough thread beyond the stripped portion to get a hold of, but alas, no joy.

Advice apprecitaed, TIA






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New I may have done a bad thing [900][1994]
posted by  Raptop  on Thu Apr 21 20:57 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.