Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

oil in/on intake manifold (960) 900 1995

A friend brought over his new-to-him '95 960 (new shape) with about 200K miles on it to have me look at it. Would've been better if he'd had me look at it before buying, but that's water under the bridge.

The problem I'm concerned about is a harsher than normal sound above 3000 rpm, and oil fouling on/around the outside of the throttle body (which of course leaked down the rest of the driver side of the block). When I pulled the air intake hose the inside of the intake manifold was wet, and there was what I estimate to be probable about 1/2 cup of oil sitting in the bottom of that big bulbous manifold.

I'm more of a redblock guy, so this is me asking what list wisdom is from those who know this engine better than I do. Is this considered normal, a minor fix, or the harbinger of expensive work to come?

Thanks,

Bram






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New oil in/on intake manifold (960) [900][1995]
posted by  Bram Smits  on Thu Apr 21 11:43 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.