Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2016 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake rotor loose but won't come off HELP! 700 1991

posted by  someone claiming to be ibs740 on  Sat Apr 16 13:16 CST 2005 [RELATED]

Hi: I have never seen anything like this before. The brake rotor is loose but it will not come off. Yes I removed the locating pin. I can rock it side to side & move it approx. 3/16" away from the hub but that is it.
It feels similiar to fitting a puck into a caliper. Very tight tolerance fit that must move exactly at 90 degrees to the bore. Wailing w/ a hammer does nothing but cock it from side to side. I knocked all the wheel studs in as far as they will go but no difference.
It was rusted on at first but lube & a hammer loosened it.
I could remove the hub & replace it but it is only 2 years old & they cost $300.00 (Canada).
Any ideas?
1991 740 turbo wagon, girling abs, 280mm rotors 26mm thick.

ibs740






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake rotor loose but won't come off HELP! [700][1991]
posted by  someone claiming to be ibs740  on Sat Apr 16 13:16 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.