Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

R-134a conversion / Vacuum 200 1988

posted by  Fiver on  Fri Apr 15 06:59 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Going to convert my 240 to R-134a, the compressor is shot so I will be replacing pretty much everything including the compressor.

After I've replaced the compressor (with the correct oil), expansion valve, evaporator, and drier, I understand that I need to vacuum the system.

Any reason not to use this to do the job?

http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=92475

After I've vacummed it out for an hour, it is just a matter of running the AC at max and putting in just over 2 lbs of 134-a, correct?

Thanks for any advice.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New R-134a conversion / Vacuum [200][1988]
posted by  Fiver  on Fri Apr 15 06:59 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.