Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2014 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Timing Belt teeth Sheared 700 1988

posted by  VOLVO760 on  Wed Apr 13 11:11 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have an 1988 Volvo 760 turbo with 220k on the odo. A few days ago, I began to have a problem with starting up the car. It would start but would run very uneven.I tried to start it up today, but nothing happened. I hooked up a remote starter, and observed that the cam was not turning. I took off the belt covers and noticed that the belt teeth around the crank pulley were sheared off.I tried very gently to turn the cam shaft by hand, but it would only turn a little forward and backwards and then comes to a stop. Would there be a possibility of bent valves? The crankshaft turns freely all the way around.
Thanks....






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timing Belt teeth Sheared [700][1988]
posted by  VOLVO760  on Wed Apr 13 11:11 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.