Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Radio removal 200

posted by  atvwmike on  Wed Apr 6 00:15 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I just picked up a nice 1993 240 with only 78k on it and I am very happy with it. I would like to install my XM radio in it but am having a little trouble getting the stock radio out. I removed the plate to the left of the radio and removed the two torx screws also on the left. Then I started to wiggle the unit out and at about the half way point it gets stuck. I don't want to break anything so before I start adding more pressure to the problem I thought I would check and see if I was up aginst a bracket or clip???






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Radio removal [200]
posted by  atvwmike  on Wed Apr 6 00:15 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.