Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Snapped a rod, I think 200 1988

I was driving earlier this month and my 240 wagon lost power and a knocking sound started coming from the engine - it also idled poorly and vibrated a lot. Oil and coolant were both fine. When I got it home (slowly), I determined that it wasn't firing on the piston nearest the firewall. When I stuck a rod into the sparkplug hole and cranked it over, I could tell that that piston wasn't moving up and down. I think that I either demolished a piston (how?) or the engine snapped a rod. This is surprising for an old Volvo, but I guess not too surprising since the previous owner didn't take great care of the car.


Where can I get a new engine for this car? I posted a classified ad here, but does anyone know of any other sources? What should I expect to pay for a new motor and installation? I'm hoping that this can be fixed for under $1500 or so. The car's otherwise in really good shape despite its 183k miles, and I've put a lot of work into it.


-b.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Snapped a rod, I think [200][1988]
posted by  bosozoku  on Sat Apr 2 02:42 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.