Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2010 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Power Window Motor Pushes Window Too High - Should there be a 'stop' of some sort? 700 1989

posted by  Landru on  Thu Mar 31 13:26 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jan 10 10:16 CST 2009
[RELATED]

My car is a 1989 740 turbo wagon. The driver's window goes up and pushes out of alignment - enough that it whistles. I took the door panel off, and I can see where the regulator bolts to the door (in fact, it flexes and the metal is slightly broken. I put a big washer to cut down on the flex and it helped for a day or so. The hanes mentions a stop of some sort in the middle of the door. I don't see it and I don't know how it works or what I'm looking for. I took the door panel off the passenger's side, and I can't see anything different. The driver's window goes up and down really fast - I'm guessing it is a new motor and it wasn't put in right?

Any suggestions?

thx

Andrew






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Power Window Motor Pushes Window Too High - Should there be a 'stop' of some sort? [700][1989]
posted by  Landru  on Thu Mar 31 13:26 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.