Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2023 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Speedo cable connection? 200 1984

posted by  someone claiming to be dazed and confused on  Tue Jan 25 14:29 CST 2005 [RELATED]

I've removed my instrument cluster to replace bulbs and repair the clock (thanks for the tips on replacing the capacitors). When I pulled the cluster out, I noticed that the speedo cable appeared to have no physical connection to the back of the speedo head. There's a flanged housing with the square cable end sticking out coming from the vicinity of the firewall, and what appears to be a busted, black fitting on the back of the speedo itself. But there doesn't seem to be any 'snap', 'screw' or 'click' connector to hold one to the other. How do I reinstall the cluster? Just take aim, shove and hope for the best?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Speedo cable connection? [200][1984]
posted by  someone claiming to be dazed and confused  on Tue Jan 25 14:29 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.