Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How do you get the cam bolt loose to replace the front seal? 200 1980

uid 15053's pic
posted by  Dylan Berichon on  Sat Nov 6 12:24 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:22 CST 2014
[RELATED]

I've been trying to figure out how to get that bolt loose that holds the camshaft sprocket on the front of the engine. My Bentley shows a picture of the top of the head having to be removed, but I'm not going to go that far today.

How about getting the other bolts off in order to replace the seals? I already got the crank bolt off, but I need to figure out how to get the i-shaft bolt off as well.

This car has a B-21f, and an m-46 transmission.

Thanks as always.
--
If you listen to the radio in Portland, OR, you may know me as "Portland's Favorite Soul Brother!"






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How do you get the cam bolt loose to replace the front seal? [200][1980]
posted by  Dylan Berichon  on Sat Nov 6 12:24 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.