Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

how to set the timing on 91 200

posted by  lenny on  Sat Oct 30 09:43 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a timing light but have never used it. I know about hooking up to battery and hooking the other clip to #1 plug wire and I know how to adujust the distributer. I know where the timing mark is on the plastic cover above the crankshaft pulley and with my 230 engine it says to put it at 12 degrees+-4 degrees at 750rpm. That is what is says in my repair book. Do I put a white mark on the pulley just below the 12 degree mark and then as it spins adjust the distributer until the light blinks right with the dot I put on the pulley. I am just a bit confused on that part of it. Help would be much appreciated.

lenny






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New how to set the timing on 91 [200]
posted by  lenny  on Sat Oct 30 09:43 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.