Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2010 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

need sugestions for stuck clutch slave cylinder 700

posted by  yama on  Thu Oct 28 12:54 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 25 05:26 CST 2013
[RELATED]

Trying to remove a clutch slave cylinder from a bellhousing with a hydraulic clutch setup. Removed the snap ring but the slave cylinder doesn't want to budge. I've sprayed a bit of PB around the edge. The bellhousing is not in a car. Thinking of maybe applying a little heat or using a larger hammer. Just worried about cracking or stressing the aluminium. Does anyone have any suggestions?
thanks
--
1990 240 Sdn 280K mi, 1990 240 Wgn 5spd 158K mi






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New need sugestions for stuck clutch slave cylinder [700]
posted by  yama  on Thu Oct 28 12:54 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.