Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

960 Coil not grounding! 900

posted by  NormL on  Sat Oct 23 07:12 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi, following up on my question regarding coil #4 on my 92 960...

I swapped coil #4 for coil #2 and #1 (different power stages) and cylinder #4 was still not getting any spark.

I took the coil connector off, and found that even though I have ~14V at the positive terminal, the ground is not working.

I tested the +14V with probe to the positive terminal and multimeter grounded to the head. When I grounded the multimeter to the negative terminal for the same coil, I get basically no voltage.

I jumpered the coil wire ground (Green/red) to the ground off cylinder #2. Didn't make a difference. I'm going to try and ground it off #1 now... cross my fingers.

Does anyone know how I can ground the #4 coil?? Could I just ground it to the engine??

Thanks!!

If you're really adventurous and know of a method to fix this, please call me at 765-409-4898!! Thanks!!!!!

Norm





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 960 Coil not grounding! [900]
posted by  NormL  on Sat Oct 23 07:12 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.