Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

FPR: Difference between part #s 0 280 160 292 and 0 280 160 292 ? 700 1985

posted by  ndesouza on  Mon Oct 18 19:59 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 18 15:14 CST 2012
[RELATED]

I have an 85 740 GLE (non-turbo) with an 2.2 LH Jetronics ECU setup.

I currently have a BOSCH FPR Part # 0 280 160 294 installed. However, the FcpGroton site seems to indicate that this FPR is used for the 89-92 740 Non-Turbos - while the earlier 740s use a 0 280 160 292.

Anyone know what the difference between the 2 part #s are ? The 294 has 3.0 bar stamped on the side opposite the Part #. Anyone know what the pressure spec. for the 292 is ? I expect it will be similarly stamped on the FPR.

Thanks !

Noel






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New FPR: Difference between part #s 0 280 160 292 and 0 280 160 292 ? [700][1985]
posted by  ndesouza  on Mon Oct 18 19:59 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.