Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Vibration after changing rear transmission mount. Need ideas for fix ! 200 1993

posted by  Mr. Tool on  Mon Oct 11 08:26 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 1 17:19 CST 2014
[RELATED]

Hello: I have a 1993, 240 Wagon, 184,00 miles, B230F Engine, AW70 Automatic Transmission.

Recently I replaced my front control arm bushings and sway bar bushings. Rebalanced the tires and rotated them. Got a front end alignment. Drove the car and everything was fine.

THEN.....I replaced the rear transmission mount. The one that connects to the rear crossmember at the rear of the transmission. Since doing this I have had a noticable vibration while driving. It feels like it coming from the drivetrain

QUESTION?

1. Is there some sort of alignment on this rear bushing? The holes in the bracket that mounts the bushing to the rear of the transmission does appear to be slotted horizontally.

2. What else could be causing this?

3. Weak/bad engine mounts (especially the passanger side one)?

Any assistance would be gretly appreciated. Thanks.....Mr. Tool
--
Mr. Tool






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Vibration after changing rear transmission mount. Need ideas for fix ! [200][1993]
posted by  Mr. Tool subscriber  on Mon Oct 11 08:26 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.