Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2014 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Timing Belt cover shredded 700

posted by  zimmiefan on  Fri Oct 8 06:11 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

The upper timing belt cover on my 1990 765T has worn/burned through because the camshaft pulley is rubbing against it. I recently replaced the headgasket and the timing belt and then buttoned it all back up. The engine is running fine, but I noticed the TB and camshaft are contacting the plastic cover and burning through it. Is it common for the camshaft pulley to not seat properly, causing it to contact the cover, or did I somehow force the TB cover too far back toward the engine. This ever happen to anyone else out there? thanks for any insights.
chris in vermont, 244, 765, 945






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timing Belt cover shredded [700]
posted by  zimmiefan subscriber  on Fri Oct 8 06:11 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.