Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

engine mounts unbolted 700 1986

posted by  jadnhm on  Thu Oct 7 05:49 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 22 18:03 CST 2012
[RELATED]

While repairing something else (Idle Air Control valve) I accidentally unbolted TWO of the three bolts that hold the driver's side engine mount bracket to the block.
The IAC is mounted on a bracket which is bolted to the intake on the top and the block on the bottom.(Or so I thought) The rubber shocks for the IAC were broken and I couldn't get a good handle on it to unbolt the clamp and slide it out, so I just took the whole bracket out. BIG MISTAKE. The bottom bolts on the bracket are actually holding the engine mount bracket to the block as well. After I got them out (they came out surprisingly easy) the engine block slid down relative to the bolt holes in the bracket, so now I can't get the bolts back in.

Save yourself a lot of trouble and spend the time working on getting the IAC out of it's holder and don't take the bracket out with it. Stupid me....

Any ideas about how I'm gonna get those bolts back into the block?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New engine mounts unbolted [700][1986]
posted by  jadnhm subscriber  on Thu Oct 7 05:49 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.