Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Instrument Cluster rear wires '86 + 200

uid 25912's pic
posted by  Sven's Maintainer on  Thu Oct 7 02:43 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 16 20:44 CST 2012
[RELATED]

My '86 240 instrument cluster has a double male spade connector on the upper left of the rear panel - where the underdash wires connect. On both of our '89's, this connector is blocked off by a piece of clear plastic tubing.

On the '86, is anything supposed to be connected to that terminal? I know that I didn't always leave it as originally hooked up when working on it many years ago. It now has a wire on that terminal (yellos??) and I may need to correct that.

I'm hoping for some confirmation that the terminal pair should be left unused on the '86, or what it is for.

Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Instrument Cluster rear wires '86 + [200]
posted by  Sven's Maintainer  on Thu Oct 7 02:43 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.