Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2008 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

front wheel bearing seal 140-160 1969

posted by  cravemeister on  Sat Oct 2 18:56 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jan 25 18:58 CST 2013
[RELATED]

I am repacking my front wheel bearings and have a question regarding the inner seal. The original seal that I removed was tin with a felt on the surface that contacted the stub axle. The replacement is a 2 piece combo....A rubber v-seal with a metal seal washer. It is not obvious to me how this new seal/washer should be installed. Do I put the seal on the stub axle and than slide the hub on with the seal ring installed? Does the V-groove on the seal ride on the sealing washer? Which side of the v-seal faces out? Surely this is routine stuff. Can someone draw me a picture?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New front wheel bearing seal [140-160][1969]
posted by  cravemeister  on Sat Oct 2 18:56 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.