Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2002 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

OD connecting piece 120-130

uid 17774's pic
posted by  Damian on  Tue Sep 28 09:55 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Wondering if anybody has the red metal piece which connects the D type OD unit to the tranny box. Though it's kind of hard to see in photo, I discovered a crack in metal, next to one of the bolt holes (see blue arrow).

What's even worse is that when all the bolts are tightened, I can actually slip a feeler gauge into space between OD and connecting piece. I only hope that the OD mounting surface isn't bent, looks like I'll have to detatch unit and check it out ASAP. What a drag, was all set to bring M41 down to Eugene for installation. Thanks!







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New OD connecting piece [120-130]
posted by  Damian  on Tue Sep 28 09:55 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.