Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

won't turn off 200 1981

posted by  sstef on  Sun Sep 26 16:03 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 1 10:40 CST 2008
[RELATED]

I have to stall my wagon by putting it into gear with brake on because it stays running when I turn off the ignition.

I looked at the stock cylinder - yikes (no getting that off). The wiring just pops off the end though, so I thought I could chop the end off and wire the 4 wires it to an aftermarket key cylinder (4 position).

Is this okay to do? There aren't a lot of 240s left in Canada from which to get parts and I hate doing the stall thing (I can hear stuff banging from the shuddering in the back).

--
__Stef; 81 DL wagon B21A SU carb M46 __313k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New won't turn off [200][1981]
posted by  sstef  on Sun Sep 26 16:03 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.