Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

car dies after shift into second 200 1983

posted by  someone claiming to be bben on  Fri Sep 24 11:15 CST 2004 [RELATED]

The beast is a '83 242 Turbo. It was driving normally just prior and after a stop sign it conked out as I shifted from 1st to 2nd. It will not restart. It cranks, but to no avail. Strange it would just stall like that. All the hoses are tight. I checked the timing belt: the cam moves as I turn the crank bolt. Swapped in a different fuel pump realy, but no change. Fuses are good. Swapped in an old coil; no difference. Plugs are not fouled. The car is still stranded so I have been unable to do further work.
I've had this car since March and have been getting up to speed so all tune up items are new except the timming belt. The only problem with the car is that it runs very rich (smoke and hesitation) for the first minute or two. Otherwise it runs quite well.
Anyone have a similar situation occur? Thanks for any help.

ben






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New car dies after shift into second [200][1983]
posted by  someone claiming to be bben  on Fri Sep 24 11:15 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.