Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

I still can't find where the A/C orfice tube goes 900

posted by  Progun on  Thu Sep 23 14:44 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Mar 12 14:35 CST 2012
[RELATED]

I removed the high pressure fitting against the firewall where I thought it would be and found an empty tube. The orfice o-ring seals in the tube but I don't know if it goes there. Does a '96 have a different style like an expantion valve or something? I also found the outlet of the drier was fused to the hose fitting so when I removed it, with much force, it took all the aluminum threads with it. I need to get a new end put on the low pressure hose unless someone has a hose to sell. Thanks for all the help. Paul
--
'96 965, longtime 240 owner and 200K mile member






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New I still can't find where the A/C orfice tube goes [900]
posted by  Progun  on Thu Sep 23 14:44 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.