Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ok. i've asked once before and now...well...argh 200

posted by  whitetrashsteve on  Tue Sep 21 08:03 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

so i'm about ready to give up on my 244 and its brakes. here's what i've done:
replaced both front calipers, all the pads all around, turned the rotors, replaced master cylinder, and bled the brakes about 4 times.

I've still got no brakes. when the car is off, it seems like the brakes are building up pressure. when the car is on, the piston pushes out (i saw this when the MC was off) but there appears to be no pressure in the brake system. no bubbles in the tube when i'm bleeding it and now for the first time since i started the brake job the brake failure light is on. and there are no visible leaks.

...wha's goin on?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ok. i've asked once before and now...well...argh [200]
posted by  whitetrashsteve  on Tue Sep 21 08:03 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.