Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2005 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

can't find shop to turn 122 drums 120-130

posted by  mikeriehm on  Tue Sep 21 00:32 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi. I've replaced and rebuilt just about every part of the brake system on my '62 122S. The one thing I didn't do was turn the drums in the rear (front disk). I thought I might not need to do this, but the brakes are pulsating pretty severely and obviously coming from the rear.
I pulled the drums and am now unable to find a repair shop or machine shop that can turn them because they are too small to fit the jigs available on standard turning lathes. Even the local machine shops can't find a way to do it. Has anyone else encountered this problem or have any solutions.
I saw the Vclassics article on conversion to 'full-size '70's Ford rear end and realize this is an option. Anyone have any experience doing this conversion?
I know I can buy drums, but at $200 a pop, I'd rather explore these other two options. Thanks, Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New can't find shop to turn 122 drums [120-130]
posted by  mikeriehm  on Tue Sep 21 00:32 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.