Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What size socket do I need for pinion nut on front of differential 200 1983

posted by  someone claiming to be toofourdy on  Mon Sep 20 03:17 CST 2004 [RELATED]

I went to replace the pinion oil seal on my 83 245 this weekend and, after unbolting the driveshaft, realized my 24 mm socket was not big enough to loosen the nut on the pinion shaft that would let me remove the flange and get to the oil seal. I had a 1 1/4 socket, which proved too big and my metric conversion ability isn't what it used to be. Can someone help me out here?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What size socket do I need for pinion nut on front of differential [200][1983]
posted by  someone claiming to be toofourdy  on Mon Sep 20 03:17 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.