Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2018 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Who makes a decent header pipe? Not A & B. 200 1986

uid 17010's pic
posted by  tvg on  Thu Sep 16 06:31 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 21 14:10 CST 2007
[RELATED]

I've put two A&B header pipes on and they've both immediately leaked, one at the cat flange and one at the manifold flange. The welds have generally looked shoddy and have leaked. So, who makes (sells) a reasonably priced header that I'll only have to put on once?

By the way, the new cat which is also from A&B (according to the FCP website) has good looking flange welds - it looks like it was welded in an entirely different shop.

Thanks,
Tom






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Who makes a decent header pipe? Not A & B. [200][1986]
posted by  tvg  on Thu Sep 16 06:31 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.