Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2007 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Vacuum Hose Source 700

posted by  duc phan on  Tue Sep 14 07:52 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jun 4 10:33 CST 2009
[RELATED]

Per the FAQ, the following vacumm ID hose are necessary for the B230FT motor:

Hose Inner Diameter for B230FT Turbo
4.2mm (Volvo p/n 976734) - 134 inches
6.6mm (Volvo p/n 976736) - 26 inches
3/8inch (for brake booster) - 12 inches

I called the local Volvo dealer and they will only sell per yard.

I called FCP Groton and they told me they have braided vacuum hose in the following ID diameter:

5mm,
7mm,
and one just uder 1/2"

1. Would FCP hose fit ok. They are larger, but not much. I believe the 7mm and the just under 1/2" are good substitute for the 6.6mm and 3/8 respectively. I am mainly worried about the .8mm between the 4.2mm and the 5mm. Your opinion is requested.

2. Would you use FCP hose yourself, or would you buy from Volvo dealer? Your opinion is requested.

3. Does any body have a detail listing of all the vacuum hose on a B320FT motor?

I thank you advance for your assistance.

--
91 Volvo 745 Turbo, 91 Nissan 300ZX TT, and 01 Volvo S60 2.4T






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Vacuum Hose Source [700]
posted by  duc phan subscriber  on Tue Sep 14 07:52 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.