Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'86 always takes two starts. First crank, pause, second crank..START! 200 1986

uid 25253's pic
posted by  Cabbie2169 on  Sun Sep 5 09:33 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

It's a wonder the starter and the flywheel are still good. The car has always taken two times to start. When I hold the ignition to start the first time, the engine turns over...and over..then I pause. Wait until everything quiets, then turn the ignition to start and the engine starts right up.

I want it to start the first time. I haven't ever gotten into the fuel delivery side of these 240s..but I'm suspecting that the first crank sorta is "priming" up the fuel rack and the second crank allows the injectors to spray. I'm clueless though. Can you help me with fixing this thing? Thanks,
Cabbie2169






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '86 always takes two starts. First crank, pause, second crank..START! [200][1986]
posted by  Cabbie2169  on Sun Sep 5 09:33 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.