Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Salvage injectors? 200

posted by  MSB on  Thu Sep 2 16:10 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 2 21:08 CST 2007
[RELATED]

I've taken out the injectors on my '90 240 GL and i am about to send them off to be tested/cleaned.

But...

The nozzle on one looks *bent* ever so slightly. I can see it just my eyes, but a magnifying glas makes it clear.

I'm guessing this mean the injector is hosed. Right?

So, if I need a new injector (that costs what, a minimum of $175 new? 125 rebuilt?), is it worth it to pick-and-pull one or two?

I would figure many would be fine with cleaning, but does the cost of cleaning and the chance of getting a bad one offset the savings?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Salvage injectors? [200]
posted by  MSB  on Thu Sep 2 16:10 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.