Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2019 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

code 311, tried everything 900 1993

posted by  Nicefly on  Wed Aug 25 04:55 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Nov 10 09:31 CST 2007
[RELATED]

On my 960 3.0 the infamous arrow on the dash and the w/s/e lights on the console are intermittantly on.
Retrieved the code from the ODB system and it said 311( no RPM signal from the tranny).
The PNP switch is renewed about 4 months ago and again taken out yesterday, cleaned it (looked good, as new) and put it back on the tranny.
Renewed the BDP sensor (Vehicle Speed Sensor) on top of the bell housing and still the code comes up.
All contacts are cleaned and checked.
Is there anyone out there who can help me out....?

Thanks!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New code 311, tried everything [900][1993]
posted by  Nicefly  on Wed Aug 25 04:55 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.