Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

recirculate air vacuum control leak 200

posted by  yama on  Mon Aug 16 13:57 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 25 05:26 CST 2013
[RELATED]

Deceided to try and fix a problem with a vacuum leak in the recirculate air function. Unless this button is pressed in a leak is present. By pinching the line the leak goes away. Problem is this line heads behind the heater core and is very difficult to get at. The line is not leaking at the farest point I can reach. Any words of wisdom or suggestions on solving this problem?
--
1990 240 Sdn 277K,tach,strut brace,turbo sway 1990 240 Wgn M47II 157K,tach,strut brace,poly bushings,IPD sways,bilsteins






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New recirculate air vacuum control leak [200]
posted by  yama  on Mon Aug 16 13:57 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.