Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2003 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tapping an Overrider bar that has been rechromed 444-544

posted by  someone claiming to be Belinda on  Mon May 31 06:58 CST 2004 [RELATED]

The used bumper that I recently bought for my 444 has one glich. When they chromed it, they neglected to tape off the holes on the overrider bar. So chrome plated out in there and now I have to tap the holes. One attempt was made, and one of the holes was easily tapped because there were still a few threads left. The other one...so sorry chica. So, I drilled out the hole (using an 'R' sized drill bit) and am now attempting Numero 2 attempt at tapping it.

So far, it's looking bleak. Does anybody know how to do this properly?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tapping an Overrider bar that has been rechromed [444-544]
posted by  someone claiming to be Belinda  on Mon May 31 06:58 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.