Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Temp sender wire - where does it attach to the harness? 200 1980

posted by  zrubin on  Fri Apr 23 16:59 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 20 15:45 CST 2012
[RELATED]

A while back, on my 1980 245DL (B21F) I was holding the wire that runs from the temperature gauge sender in the head when it suddenly broke free from the harness. Now I have the head off, and surprisingly the harness (it's the original) is in pretty good shape - I don't see any hole in the insulation anywhere. Can someone describe where I should look to find where that wire runs into the main harness? Or should I just run it back from the big connector near the firewall? Thanks

Zack
1980 245DL M46 272k
1988 745T+ M46 191k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Temp sender wire - where does it attach to the harness? [200][1980]
posted by  zrubin  on Fri Apr 23 16:59 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.