Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Would these front strut boots fit? 200 1989

posted by  greg_mustang on  Wed Mar 31 03:06 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 10 07:26 CST 2014
[RELATED]

Hi All,

Any reason why these strut boots:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33590&item=2470799838#ShippingPayment

would NOT fit my 89 240??? I am installing boge turbo gas cartridges. Keeping original upper strut bearings.

As I can now see (with the help of BB replies) the original bumps stops were/are held on the small washer at the top of the strut shaft below the upper bearing. The bottom just tie wraps to the strut tube so that's for sure the same. One of my bulp stops has fallen (i.e. the small washer has ripped out of it), and the orig boots are disintegrated.

Any thoughts?

Thanks, and sorry to ask again about strut boots... I want to have all I need to do this job once only.

Greg Mustang
Montreal - Ottawa
Canada





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Would these front strut boots fit? [200][1989]
posted by  greg_mustang  on Wed Mar 31 03:06 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.