Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

What would readings on manifold Gauge Ideally be? 200 1982

posted by  nabramson on  Tue Mar 30 17:43 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 20 15:00 CST 2011
[RELATED]

Just completed conversion of my car to R134a using Volvo kit according to its instructions-I just added the low side port. Can't say for sure until it gets real hot but it seems OK-It realy cooled but it was 45-50 degree's out last Sunday. One Question. It says on the low side 25lbs. ( I put in a little over 3 cans R134a). I did not test it with the High side gauge but what would the ideal readings be between high & low side ?
PS I think a manifold Gauge is a good investment in relation to what is normally supplied in the InterDynamics kit.
PPS I intend to also add Aux cooling fan.

Car is '82 244DL 4spd+OD using York Compressor , 160K+ miles.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What would readings on manifold Gauge Ideally be? [200][1982]
posted by  nabramson subscriber  on Tue Mar 30 17:43 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.