Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Torque amounts for f. caliper and caliper mount 700

posted by  Coldbrick on  Fri Mar 19 03:23 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi,

Ok so I've sorted out why the replacement (Brembo) rotors won't hold the bearings properly. The seal and retaining ring the keeps the in-board bearings in has been changed to a larger size- so now I wait for that.

In the meantime does anyone know the torque values for the caliper mounting bolts and the 2x 10mm allen bolts that keep the bracket on?

Also a discovery I made. I had a slider pin break off in the caliper mounting bracket so I had to order a whole new mounting bracket from Volvo. It shows up with caliper bolts and sliding pins already installed for the reasonable price of $38 CAD. The dealer was even surprised as the pin kit alone costs $70 CAD. Just an FYI for others.

Thanks again,

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Torque amounts for f. caliper and caliper mount [700]
posted by  Coldbrick  on Fri Mar 19 03:23 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.