Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front strut bump stop and boot 200 1989

When I did the front brakes I noticed the drivers side bump stop has slid down to the bottom. How is it 'mounted' to stay at the top?

Also, Am i correct to assume the boot rolls around the bottom lip of the bump stop to stay in place?

I want to know what else to buy before doing the struts... I need boots but what about the bump stops? They physically look fine, except the driver's side doesn;t sty at the top.

Thanks in advance,
Greg






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front strut bump stop and boot [200][1989]
posted by  greg_mustang  on Thu Mar 18 06:18 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.