Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

temperature compensation board bypass successful 200 1986

posted by  someone claiming to be kamakunga on  Tue Mar 16 10:12 CST 2004 [RELATED]

thanks to this post http://www.brickboard.com/RWD/index.htm?id=746268

it was an easy job to remove and jump the terminals.

not having soldering experience I pulled two connecters off the board and soldered them to each end of my jumper wire then pushed them onto the
pins, this helped to keep them in place as i soldered them to the pins.

Robert

86 245 174,000 mile self locking odometer ,Rust Hole high flow cabin air intake sysem, Silicone Goop wiring harness, Multi Sway t.a. bushings, Duct Tape spanned rear bumper to body, Terrerium wheel wells.

91 nissan 4cyl truck 258,000 miles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New temperature compensation board bypass successful [200][1986]
posted by  someone claiming to be kamakunga  on Tue Mar 16 10:12 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.