Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2010 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Glueing the drivers side mirror back on 900 1994

posted by  DanR on  Thu Mar 4 09:48 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 15:25 CST 2014
[RELATED]

I was getting into the car one afternoon back in January and I noticed that the glass part of the mirror fell out when the door was closed, because the company I work for doesn't remove the snow in a timely manner, this was to my benefit, the glass just fell into the snow and did not break.
I did glue it back in with a two part epoxy, but just noticed that it is coming loose. Anybody have an idea of what adhesive to use. I think the epoxy would work if absolutely no water gets behind the panel. The water then freezes and the adhesive starts to slowly break.

So if anybody has some ideas please let me know.

Thanks for any and all responses.

DanR 94 964 245,000 miles* (11,000 on the new engine)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Glueing the drivers side mirror back on [900][1994]
posted by  DanR subscriber  on Thu Mar 4 09:48 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.