Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2001 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

wiring harness replacement: what all do I need? 700 1986

posted by  Joe Bonner on  Thu Mar 4 07:53 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 29 11:51 CST 2011
[RELATED]

Well, this weekend I'm going to attempt to replace the engine wiring harness on my '86 740T. I've got a replacement harness from Dave Barton. I have his instructions and diagrams and I've read the FAQ several times.

I've read that some cable ties will need to be snipped. I assume I should have extras on hand. What else do I need?

Am I correct in understanding that the intake manifold does not need to be removed on the 740T?

I think Dave suggests replacing the vacuum hoses while I'm in there. Can I pick these up at NAPA, or do I need to get an order in somewhere ASAP?

Thanks in advance!

Joe






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New wiring harness replacement: what all do I need? [700][1986]
posted by  Joe Bonner subscriber  on Thu Mar 4 07:53 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.