Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Center Driveline Support Rubber?? 200

posted by  Volbro245ti on  Sat Feb 28 10:24 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Sorry I hit the wrong button the previous message. My question is how much play or movement should there be in the rubber support on the middle of the driveline? My '86 with 200K+ miles has about 6-8mm ( 1/4" to 5/16") of vertical movement.The bearing is fine and u-joints are fine.I can see that the rubber support is loose although it is not cracked or torn. The spring is still in the low half to the crossmember.I can't find any reference to play or travel in the Bentley manual or Haynes. Maybe this is normal??? Any help or advise is appreciated. Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Center Driveline Support Rubber?? [200]
posted by  Volbro245ti  on Sat Feb 28 10:24 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.