Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2022 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

alternative temp compensation board fix 200

posted by  lrisius on  Fri Jan 30 23:27 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 17 05:59 CST 2014
[RELATED]

Hi,
I love the temperature compensation board fix of soldering a jumper from pin 1 to 3- I just wasn't crazy about soldering on my instrument cluster in the event that I ever wanted to revert, etc. IPD's jumper is a neat solution but $15 plus shipping cost and I especially didn't want to wait on the part. So, I took the bad temp compensation board, scraped the printed circuity off around each of the four pin connecters with a utility knife and soldered a jumper on the board from pins 1 to 3. Voila! My own little jumper kit. I checked it with an ohmeter to make sure only pins 1 and 3 had any continuity between them to make sure I had scraped enough. It works great!
Someone may have already come up with this but I couldn't find it in the archives so forgive me if it is redundant. Also, thanks to whoever originated the 1 to 3 jumper idea. Info like that is why I love the brickboard.
Thanks!
Lyle






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New alternative temp compensation board fix [200]
posted by  lrisius  on Fri Jan 30 23:27 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.